Produkte von PrimaCreator aus der Kategorie Ersatzteile & Zubehör > Upgrades > Nozzles

MK8 Nickel Plated Copper Nozzle 0-8 mm - 1 pcs

MK8 Nickel Plated Copper Nozzle 0,8 mm - 1 pcs

Fits to: Creality CR-10 series, MakerBot Replicator 2, CraftBot series and others.

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.

All nozzles from PrimaCreator are made from the best high-quality brass, copper or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.

For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.

The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.

After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.

The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.

The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.

The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.

The series of nozzles from PrimaCreator is the perfect choice for people who only wants the best and at a great value!

MK8 Nickel Plated Copper Nozzle 0-6 mm - 1 pcs

MK8 Nickel Plated Copper Nozzle 0,6 mm - 1 pcs

Fits to: Creality CR-10 series, MakerBot Replicator 2, CraftBot series and others.

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.

All nozzles from PrimaCreator are made from the best high-quality brass, copper or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.

For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.

The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.

After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.

The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.

The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.

The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.

The series of nozzles from PrimaCreator is the perfect choice for people who only wants the best and at a great value!

MK8 Nickel Plated Copper Nozzle 0-4 mm - 1 pcs

MK8 Nickel Plated Copper Nozzle 0,4 mm - 1 pcs

Fits to: Creality CR-10 series, MakerBot Replicator 2, CraftBot series and others.

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.

All nozzles from PrimaCreator are made from the best high-quality brass, copper or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.

For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.

The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.

After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.

The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.

The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.

The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.

The series of nozzles from PrimaCreator is the perfect choice for people who only wants the best and at a great value!

MK8 Nickel Plated Copper Nozzle 0-25 mm - 1 pcs

MK8 Nickel Plated Copper Nozzle 0,25 mm - 1 pcs

Fits to: Creality CR-10 series, MakerBot Replicator 2, CraftBot series and others.

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.

All nozzles from PrimaCreator are made from the best high-quality brass, copper or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.

For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.

The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.

After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.

The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.

The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.

The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.

The series of nozzles from PrimaCreator is the perfect choice for people who only wants the best and at a great value!

MK10 Nickel Plated Copper Nozzle 0-6 mm (For all-metal hot-ends) - 1 pcs

MK10 Nickel Plated Copper Nozzle 0,6 mm  - 1 pcs

Fits to: All wanhao that use all metal hot-end for MK10

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.

All nozzles from PrimaCreator are made from the best high-quality brass, copper or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.

For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.

The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.

After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.

The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.

The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.

The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.

The series of nozzles from PrimaCreator is the perfect choice for people who only wants the best and at a great value!

MK10 Nickel Plated Copper Nozzle 0-4 mm (For all-metal hot-ends) - 1 pcs

MK10 Nickel Plated Copper Nozzle 0,4 mm (For all-metal hot-ends)  - 1 pcs

Fits to: All wanhao that use all metal hot-end for MK10

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.

All nozzles from PrimaCreator are made from the best high-quality brass, copper or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.

For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.

The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.

After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.

The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.

The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.

The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.

The series of nozzles from PrimaCreator is the perfect choice for people who only wants the best and at a great value!

MK10 Nickel Plated Copper Nozzle 0-25 mm (For all-metal hot-ends) - 1 pcs

MK10 Nickel Plated Copper Nozzle 0,25 mm (For all-metal hot-ends)   - 1 pcs

Fits to: All Wanhao that use all metal hot-end for MK10

The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.

All nozzles from PrimaCreator are made from the best high-quality brass, copper or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.

For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.

The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.

After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.

The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.

The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.

The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.

The series of nozzles from PrimaCreator is the perfect choice for people who only wants the best and at a great value!

PrimaCreator Value Flex UV Resin - 1000 ml - Skin

When you want astonishing results for less cost than many other brands - PrimaCreator VALUE resin should be your first choice!

Resin from our VALUE line is a high-quality resin made from the best materials.
Your prints cures in sunlight or a UV curing chamber. When the curing is finished, the result is a flexible print with very small shrinkage and very soft to the touch.

The finished print is a solid color part with a beautiful matte surface with excellent details and smooth layer transitions.
Flexible resin is the perfect resin when you are looking for high detail results that needs to have a very high impact strength. The shore hardness of 65-75 D together with an incredible elongation at break of 130% makes it a resin that can use in many applications and areas.

VALUE resin is developed to perform well on low powered DLP machines such as the Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire and other printers that uses UV light for curing.

Optimized for UV Lightsource 395 – 405 nm.

Fast curing time, 4 – 12 (depending on color) seconds per layer for quicker prints.
After printing, clean you print in IPA (Isopropyl Alcohol) to rinse of extra resin left on the model.

When it´s time for curing you can use sunlight or a uv curing chamber.
Depending on print the curing times can vary:

In a UV light curing chamber, it will take about 2-5 minutes.
In sunlight, 10-20 minutes.
In daylight on a cloudy day it can take up to 60 minutes.

PrimaCreator Value Flex UV Resin - 1000 ml - Light Grey

When you want astonishing results for less cost than many other brands - PrimaCreator VALUE resin should be your first choice!

Resin from our VALUE line is a high-quality resin made from the best materials.
Your prints cures in sunlight or a UV curing chamber. When the curing is finished, the result is a flexible print with very small shrinkage and very soft to the touch.

The finished print is a solid color part with a beautiful matte surface with excellent details and smooth layer transitions.
Flexible resin is the perfect resin when you are looking for high detail results that needs to have a very high impact strength. The shore hardness of 65-75 D together with an incredible elongation at break of 130% makes it a resin that can use in many applications and areas.

VALUE resin is developed to perform well on low powered DLP machines such as the Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire and other printers that uses UV light for curing.

Optimized for UV Lightsource 395 – 405 nm.

Fast curing time, 4 – 12 (depending on color) seconds per layer for quicker prints.
After printing, clean you print in IPA (Isopropyl Alcohol) to rinse of extra resin left on the model.

When it´s time for curing you can use sunlight or a uv curing chamber.
Depending on print the curing times can vary:

In a UV light curing chamber, it will take about 2-5 minutes.
In sunlight, 10-20 minutes.
In daylight on a cloudy day it can take up to 60 minutes.

PrimaCreator Value Flex UV Resin - 1000 ml - Black

When you want astonishing results for less cost than many other brands - PrimaCreator VALUE resin should be your first choice!

Resin from our VALUE line is a high-quality resin made from the best materials.
Your prints cures in sunlight or a UV curing chamber. When the curing is finished, the result is a flexible print with very small shrinkage and very soft to the touch.

The finished print is a solid color part with a beautiful matte surface with excellent details and smooth layer transitions.
Flexible resin is the perfect resin when you are looking for high detail results that needs to have a very high impact strength. The shore hardness of 65-75 D together with an incredible elongation at break of 130% makes it a resin that can use in many applications and areas.

VALUE resin is developed to perform well on low powered DLP machines such as the Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire and other printers that uses UV light for curing.

Optimized for UV Lightsource 395 – 405 nm.

Fast curing time, 4 – 12 (depending on color) seconds per layer for quicker prints.
After printing, clean you print in IPA (Isopropyl Alcohol) to rinse of extra resin left on the model.

When it´s time for curing you can use sunlight or a uv curing chamber.
Depending on print the curing times can vary:

In a UV light curing chamber, it will take about 2-5 minutes.
In sunlight, 10-20 minutes.
In daylight on a cloudy day it can take up to 60 minutes.

PrimaCreator Value Flex UV Resin - 1000 ml - Clear

When you want astonishing results for less cost than many other brands - PrimaCreator VALUE resin should be your first choice!

Resin from our VALUE line is a high-quality resin made from the best materials.
Your prints cures in sunlight or a UV curing chamber. When the curing is finished, the result is a flexible print with very small shrinkage and very soft to the touch.

The finished print is a solid color part with a beautiful matte surface with excellent details and smooth layer transitions.
Flexible resin is the perfect resin when you are looking for high detail results that needs to have a very high impact strength. The shore hardness of 65-75 D together with an incredible elongation at break of 130% makes it a resin that can use in many applications and areas.

VALUE resin is developed to perform well on low powered DLP machines such as the Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire and other printers that uses UV light for curing.

Optimized for UV Lightsource 395 – 405 nm.

Fast curing time, 4 – 12 (depending on color) seconds per layer for quicker prints.
After printing, clean you print in IPA (Isopropyl Alcohol) to rinse of extra resin left on the model.

When it´s time for curing you can use sunlight or a uv curing chamber.
Depending on print the curing times can vary:

In a UV light curing chamber, it will take about 2-5 minutes.
In sunlight, 10-20 minutes.
In daylight on a cloudy day it can take up to 60 minutes.

PrimaCreator Value Flex UV Resin - 500 ml - Skin

When you want astonishing results for less cost than many other brands - PrimaCreator VALUE resin should be your first choice!

Resin from our VALUE line is a high-quality resin made from the best materials.
Your prints cures in sunlight or a UV curing chamber. When the curing is finished, the result is a flexible print with very small shrinkage and very soft to the touch.

The finished print is a solid color part with a beautiful matte surface with excellent details and smooth layer transitions.
Flexible resin is the perfect resin when you are looking for high detail results that needs to have a very high impact strength. The shore hardness of 65-75 D together with an incredible elongation at break of 130% makes it a resin that can use in many applications and areas.

VALUE resin is developed to perform well on low powered DLP machines such as the Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire and other printers that uses UV light for curing.

Optimized for UV Lightsource 395 – 405 nm.

Fast curing time, 4 – 12 (depending on color) seconds per layer for quicker prints.
After printing, clean you print in IPA (Isopropyl Alcohol) to rinse of extra resin left on the model.

When it´s time for curing you can use sunlight or a uv curing chamber.
Depending on print the curing times can vary:

In a UV light curing chamber, it will take about 2-5 minutes.
In sunlight, 10-20 minutes.
In daylight on a cloudy day it can take up to 60 minutes.

PrimaCreator Value Flex UV Resin - 500 ml - Light Grey

When you want astonishing results for less cost than many other brands - PrimaCreator VALUE resin should be your first choice!

Resin from our VALUE line is a high-quality resin made from the best materials.
Your prints cures in sunlight or a UV curing chamber. When the curing is finished, the result is a flexible print with very small shrinkage and very soft to the touch.

The finished print is a solid color part with a beautiful matte surface with excellent details and smooth layer transitions.
Flexible resin is the perfect resin when you are looking for high detail results that needs to have a very high impact strength. The shore hardness of 65-75 D together with an incredible elongation at break of 130% makes it a resin that can use in many applications and areas.

VALUE resin is developed to perform well on low powered DLP machines such as the Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire and other printers that uses UV light for curing.

Optimized for UV Lightsource 395 – 405 nm.

Fast curing time, 4 – 12 (depending on color) seconds per layer for quicker prints.
After printing, clean you print in IPA (Isopropyl Alcohol) to rinse of extra resin left on the model.

When it´s time for curing you can use sunlight or a uv curing chamber.
Depending on print the curing times can vary:

In a UV light curing chamber, it will take about 2-5 minutes.
In sunlight, 10-20 minutes.
In daylight on a cloudy day it can take up to 60 minutes.

PrimaCreator Value Flex UV Resin - 500 ml - Black

When you want astonishing results for less cost than many other brands - PrimaCreator VALUE resin should be your first choice!

Resin from our VALUE line is a high-quality resin made from the best materials.
Your prints cures in sunlight or a UV curing chamber. When the curing is finished, the result is a flexible print with very small shrinkage and very soft to the touch.

The finished print is a solid color part with a beautiful matte surface with excellent details and smooth layer transitions.
Flexible resin is the perfect resin when you are looking for high detail results that needs to have a very high impact strength. The shore hardness of 65-75 D together with an incredible elongation at break of 130% makes it a resin that can use in many applications and areas.

VALUE resin is developed to perform well on low powered DLP machines such as the Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire and other printers that uses UV light for curing.

Optimized for UV Lightsource 395 – 405 nm.

Fast curing time, 4 – 12 (depending on color) seconds per layer for quicker prints.
After printing, clean you print in IPA (Isopropyl Alcohol) to rinse of extra resin left on the model.

When it´s time for curing you can use sunlight or a uv curing chamber.
Depending on print the curing times can vary:

In a UV light curing chamber, it will take about 2-5 minutes.
In sunlight, 10-20 minutes.
In daylight on a cloudy day it can take up to 60 minutes.

PrimaCreator Value Flex UV Resin - 500 ml - Clear

When you want astonishing results for less cost than many other brands - PrimaCreator VALUE resin should be your first choice!

Resin from our VALUE line is a high-quality resin made from the best materials.
Your prints cures in sunlight or a UV curing chamber. When the curing is finished, the result is a flexible print with very small shrinkage and very soft to the touch.

The finished print is a solid color part with a beautiful matte surface with excellent details and smooth layer transitions.
Flexible resin is the perfect resin when you are looking for high detail results that needs to have a very high impact strength. The shore hardness of 65-75 D together with an incredible elongation at break of 130% makes it a resin that can use in many applications and areas.

VALUE resin is developed to perform well on low powered DLP machines such as the Wanhao Duplicator 7, SparkMaker Anycubic Photon, Zortrax Inkspire and other printers that uses UV light for curing.

Optimized for UV Lightsource 395 – 405 nm.

Fast curing time, 4 – 12 (depending on color) seconds per layer for quicker prints.
After printing, clean you print in IPA (Isopropyl Alcohol) to rinse of extra resin left on the model.

When it´s time for curing you can use sunlight or a uv curing chamber.
Depending on print the curing times can vary:

In a UV light curing chamber, it will take about 2-5 minutes.
In sunlight, 10-20 minutes.
In daylight on a cloudy day it can take up to 60 minutes.

P120 V4 Stock Micro SD card 256 MB

SD card for P120 V4. 256 MB

P120 V4 Steel plate for the hot-bed

Steel plate for the build plate on P120 V4

P120 V4 Touch screen

Touch screen that fits to PrimaCreator P120 V4

*Does not fit to white version 

P120 Mainboard V4

Mainboard that fits to PrimaCreator P120 V4

*Does not fit on erlier versions of P120. 

PrimaCreator MK8 Ruby Nozzle 0-8 mm - 1 pcs

MK8 Ruby Nozzle 0.8 mm

Kompatibel mit: Creality CR-10 series, MakerBot Replicator 2, CraftBot series

PrimaCreator Ruby – Haltbare Rubin-Nozzle für den 3D-Druck von abrasiven und nicht verschleißenden Filamenten

3D-Drucke mit der PrimaCreator Ruby – Rubin-Nozzle abrasive und nicht verschleißende Filamente einfach. Diese Nozzle eignet sich sowohl für Filamente, welche normalerweise von herkömmlichen Messing-Nozzles verarbeitet werden. Verarbeite weiterhin auch stark abrasive Materialien, wie Carbon, Nylon-Glasfaser und weitere Filamente – und das mit einer Nozzle. Lästiges Wechseln und damit verbundenes Kalibrieren entfällt.

Die wichtigsten Produktmerkmale einer PrimaCreator Ruby – Rubin-Nozzle:

• Nozzle besteht aus Messing & besitzt eine extrem harte Rubin-Spitze
• 3D-Drucke ein breites Spektrum an Filamenten mit einer Nozzle – Nichtabrasiv & abrasiv
• Extreme Beständigkeit & lange Nutzungsdauer
• Ideal für sehr abrasive Filamente wie Carbon, Glow in the Dark, Glasfaser & weitere
• Perfekter Durchmesser ohne gezackte Kanten bedeutet bessere 3D-Druckqualität
• In den beliebtesten Größen und Durchmessern erhältlich

Vor- und Nachteile einer Messing- & Stahl-Nozzle

Eine Messing-Nozzle besitzt eine gute Wärmeleitfähigkeit, welche für top 3D-Drucke sehr wichtig ist. Gleichzeitig verfügt der Werkstoff Messing auch über einige entscheidende Nachteile. Wenn du mit einem abrasiven Material wie Carbon druckst oder Glow-in-the-dark verarbeitest, nutzt sich eine normale Messing-Nozzle in sehr kurzer Zeit ab. Um diesen Nachteil zu vermeiden kannst du selbstverständlich einfach eine gehärtete Stahl-Nozzle verwenden. Hier hast du jedoch einen anderen entscheidenden Nachteil. Stahl transportiert und verteilt Wärme schlechter und weniger gleichmäßig.

Entdecke die PrimaCreator Rubin-Nozzle – 3D-Drucke alle Filamente mit ihr

Die PrimaCreator Ruby Nozzle ist wohl die beste, jemals hergestellte PrimaCreator-Nozzle. Sie besteht aus einem Großteil an hochwertigem Messing – genau wie alle normalen unseren Messing-Nozzles. Zusätzlich besteht die Spitze aus einem hochfesten Rubin-Stein. Verarbeite mit deiner Ruby-Nozzle nicht-abrasive PLA-, ABS-, PETG-Filamente und weitere Materialien. Weiterhin 3D-druckst du mit deiner Ruby-Nozzle auch abrasive Filamente, wie Carbon, Glow-in-the-Dark und die meisten weiteren „Nozzle-Killer“.

Hochwertiges Messing und echte Rubin-Spitze

Jede Ruby Nozzle von PrimaCreator besteht aus hochwertigem Messing und besitzt eine echte Rubinspitze. Alle PrimaCreator Nozzles werden mit einer Toleranz von weniger als ± 0,01 mm in einer hochmodernen Fabrik hergestellt. Dadurch erfolgt die Materialextrusion sehr gleichmäßig und die Oberfläche ist durchgehend glatt und optisch ansprechend.

Die richtige Einstellung machts

Für beste Ergebnisse und eine optimale 3D-Druckqualität empfehlen wir dir dringend, deine Bauplattform nach dem Wechsel auf eine andere Nozzle neu auszurichten. Beachte, dass auch, wenn deine Prima Creator-Nozzle mit deinem 3D-Drucker kompatibel ist, der Abstand zwischen Düse und Montageplattform angepasst werden muss.

Innovativer Herstellungsprozess & optische Qualitäts-Kontrollen

Der Herstellungsprozess einer PrimaCreator Nozzle beginnt mit einem ausgewähltem, hochwertigem Material. Wenn das Messing und die Rubine das Werk erreichen, findet zunächst eine optische Inspektion des Ausgangsmaterials statt. Dann wird das Material geklemmt, d.h. zu einem langen Stab zusammengefügt. Bei der Herstellung von PrimaCreator Nozzles findet dieser Prozess nur einmal statt, bei der Produktion von Billig-Nozzles muss dieser Prozess oftmals mehrmals wiederholt werden. Häufig kommt es selbst bei 3 bis 4-facher Wiederholung zu gleich dürftigen Ergebnissen.

Nach diesem Prozess durchläuft das Material ein Ultraschall-Reinigungsbad und wird anschließend erneut gereinigt und vor Oberflächenoxidation geschützt.

Die Nozzle nimmt nun ihre millimetergenaue Form an. Dabei beträgt die Toleranz weniger als ± 0,01 mm.

Glatte Oberflächen und keine Kanten – Gegen Verstopfung und Clogging

Das Entfernen scharfer Kanten aus den Nozzles ist ein sehr wichtiger Schritt, es macht einen großen Teil des Ergebnisses aus. Verbleiben zu viele scharfe Kanten in der Nozzle, wird sie anfälliger für Verstopfungen. Daher ist es wichtig, dass die Nozzle vor dem Gebrauch sehr glatt und sauber ist. In jeder Charge werden zufällig Nozzles ausgewählt, geteilt und auf Qualität geprüft. So stellen wir sicher, dass jede Ruby Nozzle alle Spezifikationen erfüllt und die Oberfläche stets in perfektem Zustand ist.

Anschließend werden die Nozzles noch einmal Qualitäts-geprüft und einzeln in einer Schutzkiste verpackt – versandfertig für dich.

Die Rubin-Nozzle von PrimaCreator ist die perfekte Wahl für Menschen, die das Beste zu einem günstigen Preis wünschen!

PrimaSelect PEI Ultem 1010 - 1-75mm - 500g - Natural

Polyether Imide (PEI) Ultem 1010 is an amorphous, amber to transparent thermoplastics with a glass transition temperature (Tg) of 217 °C and performs in continuous use up to 170 °C. This inherently flame retardant plastic has UL94 V0 and 5VA ratings.

The PrimaCreator PEI Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the PrimaCreator PEI Filament particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.

To make a successful PEI print there are a few things to keep in mind.
The printer must have the performance to meet the PEI filament and it should be printed with a nozzle temperature of 350-380°C. The heat bed should be set to 120-160°C and a heated chamber is important to have. It´s also very important to make sure that the printer is placed in a room where there´s hardly any draft and temperature fluctuations.
PEEK is best printed on a PEI sheet at a printing speed of 15-30 mm/s.

For further information, check the TDS

PrimaCreator BlackSheet 510 x 510

Weniger Warping mit PrimaCreator BlackSheet!

PrimaCreator BlackSheet ist die günstige und perfekte Lösung für Ihren Drucker und funktioniert mit den meisten Filamenten auf dem Markt. BlackSheet besteht aus einer dünnen Schicht Kunststofffolie mit einzigartigen Eigenschaften. Das BlackSheet sorgt dafür, dass Ihre Drucke auf der Druckoberfläche haften und sich leichter entfernen lassen.

Wenn Sie einen 3D-Drucker benutzen, egal ob Sie ein erfahrener Anwender oder ein Anfänger sind, sind Warping und sich lösende Drucke ein Problem. Es gibt heute viele Lösungen auf dem Markt und PEI ist zum Beispiel eine Alternative, die noch haltbarer und stärker ist, aber der Nachteil für viele Leute ist der Preis. Wir haben uns vorgenommen, ein Produkt zu schaffen, das genauso gut oder sogar besser ist als andere Marken mit ähnlichen Produkten, und so entstand BlackSheet.

PrimaCreator BlackSheet ist ein sehr haltbares Material, das Sie viele Male verwenden können, bevor es sich abnutzt, und wenn es das tut - ist es sehr einfach zu wechseln. BlackSheet ist eine perfekte Wahl, wenn Sie PLA, ABS, PETG und andere ähnliche Materialien verwenden.

Anleitung zur Installation.

• Stellen Sie sicher, dass Ihre aktuelle Bauoberfläche, Metall oder Glas sauber ist. Sie können Reinigungsalkohol verwenden, um das beste Ergebnis zu erzielen.
• Sehen Sie nach, ob das BlackSheets passt, wenn es zu groß ist, können Sie es leicht zuschneiden, damit es perfekt passt.
• Entfernen Sie die Schutzfolie und legen Sie das BlackSheet vorsichtig auf Ihre Bauplatte. Beginnen Sie an einer Ecke und arbeiten Sie sich langsam über die Platte vor. Eine Kreditkarte ist perfekt, um sie zur Hand zu haben, so dass Sie alle Blasen glätten können, während Sie gehen.
• Für beste Ergebnisse, nivellieren Sie Ihre Bauplatte neu. Der Abstand kann etwas höher sein, als Sie es gewohnt sind - finden Sie die perfekten Einstellungen für das Filament, das Sie verwenden.

Wie Sie eine schöne Oberfläche erhalten.

• Verwenden Sie keine scharfen Messer oder Gegenstände, da Sie riskieren, das BlackSheet zu beschädigen.
• Um das BlackSheet zu reinigen, verwenden Sie keine starken Lösungsmittel wie Aceton. IPA funktioniert oft am besten.
• Stellen Sie sicher, dass Sie alle Filamentrückstände von der Oberfläche entfernen.
• Sorgen Sie dafür, dass Ihre Düse nicht in direkten Kontakt mit dem BlackSheet kommt, da sie sonst schmilzt.
• Nicht bei Temperaturen über 110 Grad Celsius verwenden.

PrimaCreator BlackSheet 410 x 410

Weniger Warping mit PrimaCreator BlackSheet!

PrimaCreator BlackSheet ist die günstige und perfekte Lösung für Ihren Drucker und funktioniert mit den meisten Filamenten auf dem Markt. BlackSheet besteht aus einer dünnen Schicht Kunststofffolie mit einzigartigen Eigenschaften. Das BlackSheet sorgt dafür, dass Ihre Drucke auf der Druckoberfläche haften und sich leichter entfernen lassen.

Wenn Sie einen 3D-Drucker benutzen, egal ob Sie ein erfahrener Anwender oder ein Anfänger sind, sind Warping und sich lösende Drucke ein Problem. Es gibt heute viele Lösungen auf dem Markt und PEI ist zum Beispiel eine Alternative, die noch haltbarer und stärker ist, aber der Nachteil für viele Leute ist der Preis. Wir haben uns vorgenommen, ein Produkt zu schaffen, das genauso gut oder sogar besser ist als andere Marken mit ähnlichen Produkten, und so entstand BlackSheet.

PrimaCreator BlackSheet ist ein sehr haltbares Material, das Sie viele Male verwenden können, bevor es sich abnutzt, und wenn es das tut - ist es sehr einfach zu wechseln. BlackSheet ist eine perfekte Wahl, wenn Sie PLA, ABS, PETG und andere ähnliche Materialien verwenden.

Anleitung zur Installation.

• Stellen Sie sicher, dass Ihre aktuelle Bauoberfläche, Metall oder Glas sauber ist. Sie können Reinigungsalkohol verwenden, um das beste Ergebnis zu erzielen.
• Sehen Sie nach, ob das BlackSheets passt, wenn es zu groß ist, können Sie es leicht zuschneiden, damit es perfekt passt.
• Entfernen Sie die Schutzfolie und legen Sie das BlackSheet vorsichtig auf Ihre Bauplatte. Beginnen Sie an einer Ecke und arbeiten Sie sich langsam über die Platte vor. Eine Kreditkarte ist perfekt, um sie zur Hand zu haben, so dass Sie alle Blasen glätten können, während Sie gehen.
• Für beste Ergebnisse, nivellieren Sie Ihre Bauplatte neu. Der Abstand kann etwas höher sein, als Sie es gewohnt sind - finden Sie die perfekten Einstellungen für das Filament, das Sie verwenden.

Wie Sie eine schöne Oberfläche erhalten.

• Verwenden Sie keine scharfen Messer oder Gegenstände, da Sie riskieren, das BlackSheet zu beschädigen.
• Um das BlackSheet zu reinigen, verwenden Sie keine starken Lösungsmittel wie Aceton. Reinigungsalkohol funktioniert oft am besten.
• Stellen Sie sicher, dass Sie alle Filamentrückstände von der Oberfläche entfernen.
• Sorgen Sie dafür, dass Ihre Düse nicht in direkten Kontakt mit dem BlackSheet kommt, da sie sonst schmilzt.
• Nicht bei Temperaturen über 110 Grad Celsius verwenden.

PrimaCreator BlackSheet 235 x 235

Less warping with PrimaCreator BlackSheet!

PrimaCreator BlackSheet is the affordable and perfect solution for your printer and works with most filaments on the market. BlackSheet consists of a thin layer plastic film with unique properties. The BlackSheet makes you prints stick to the print surface and makes it easier to remove.

When you use a 3D printer, regardless if you are an experienced user or a beginner, warping and prints that are coming loose are a problem. There are many solutions on the market today and PEI is for example an alternative that’s is even more durable and stronger but the drawback for many people are the price. We set out to create a product that is as good or even better than other brands with similar products, and so enter BlackSheet.

PrimaCreator BlackSheet is a very durable material which you can use many times before it wears out, and when it does – it´s very easy to change. BlackSheet is a perfect choice when you are using PLA, ABS, PETG and other similar materials.

How to install.

• Make sure that your current build surface, metal or glass is clean. You can use rubbing alcohol to clean for best result.
• See so the BlackSheets fits, if it´s to big you can easily cut it so it fits perfect.
• Remove the protective film and carefully place the BlackSheet on your build plate. Start from one corner and slowly work your way across the board. A credit card is perfect to have at hand so you can smooth out any bubbles as you go.
• For best results, re-level your build plate. The distance can be a little higher than you are used to – find the perfect settings for the filament you are using.

How to maintain a nice surface.

• Don´t use any sharp knives or object as you risk damaging the BlackSheet.
• To clean the BlackSheet, don´t use any strong solvents like acetone. Rubbing alcohol often works best.
• Make sure to remove any filament residue from the surface.
• See to it that your nozzle doesn´t come in direct contact with the BlackSheet, it will melt.
• Do not use with temperatures higher than 110 degrees Celsius.

PrimaCreator BlackSheet 230 x 155

Less warping with PrimaCreator BlackSheet!

PrimaCreator BlackSheet is the affordable and perfect solution for your printer and works with most filaments on the market. BlackSheet consists of a thin layer plastic film with unique properties. The BlackSheet makes you prints stick to the print surface and makes it easier to remove.

When you use a 3D printer, regardless if you are an experienced user or a beginner, warping and prints that are coming loose are a problem. There are many solutions on the market today and PEI is for example an alternative that’s is even more durable and stronger but the drawback for many people are the price. We set out to create a product that is as good or even better than other brands with similar products, and so enter BlackSheet.

PrimaCreator BlackSheet is a very durable material which you can use many times before it wears out, and when it does – it´s very easy to change. BlackSheet is a perfect choice when you are using PLA, ABS, PETG and other similar materials.

How to install.

• Make sure that your current build surface, metal or glass is clean. You can use rubbing alcohol to clean for best result.
• See so the BlackSheets fits, if it´s to big you can easily cut it so it fits perfect.
• Remove the protective film and carefully place the BlackSheet on your build plate. Start from one corner and slowly work your way across the board. A credit card is perfect to have at hand so you can smooth out any bubbles as you go.
• For best results, re-level your build plate. The distance can be a little higher than you are used to – find the perfect settings for the filament you are using.

How to maintain a nice surface.

• Don´t use any sharp knives or object as you risk damaging the BlackSheet.
• To clean the BlackSheet, don´t use any strong solvents like acetone. Rubbing alcohol often works best.
• Make sure to remove any filament residue from the surface.
• See to it that your nozzle doesn´t come in direct contact with the BlackSheet, it will melt.
• Do not use with temperatures higher than 110 degrees Celsius.