Produkte von PrimaCreator aus der Kategorie Ersatzteile & Zubehör > Hersteller > PrimaCreator



PrimaSelect PLA - 2-85 mm - 750 g - metallic-grau
PrimaSELECT™ PLA ist ein sehr vorteilhaftes 3D-Druckmaterial. Es ist ungiftig und frei von unangenehmen Geruch bei der Verarbeitung. Aufgrund seiner thermischen Eigenschaften ist es einfach, super 3D-Druck-Ergebnisse zu erzielen. Filament von Prima Filaments kommt auf einer transparenten Spule. Dadurch kannst du einfach nachschauen, wie viel Filament auf der Spule übrig ist.
Polymilchsäure (PLA) ist ein biologisch abbaubares Polymer. Es wird aus Milchsäure hergestellt, die aus Getreidearten wie Mais fermentiert werden kann.
PrimaSELECT PLA hat einen leichten Glanz, wenn der 3D-Druck fertig ist. PrimaSELECT PLA gibt es in einer großen Auswahl an schönen und leuchtenden Farben. Diese besitzen ein Farbspektrum, welches auf dem RAL-Farbsystem basiert. Dies wiederum garantiert, dass du jedes Mal, wenn du eine neue Filamentspule bestellst, die gleiche Farbe erhältst.
Mit unserem neuen PrimaSELECT PLA ist es uns gelungen, ein PLA zu erstellen, welches genau deinen Bedürfnissen entspricht. PrimaSELECT PLA ist ein sogenanntes modifiziertes PLA. Dadurch ist es etwa 12-mal stärker als gewöhnliches PLA. Dies liegt an dem zugesetzten Additiv, welches mit den besten Rohmaterialien gemischt wurde.
PrimaSELECT PLA fühlt sich etwas weicher an als normales PLA. Es ist auch biegsamer und daher perfekt für alle 3D-Drucker, einschließlich Geräten mit Bowden-Materialförderung.
Die erzielbaren Ergebnisse sind erstaunlich und das Material besitzt eine extrem starke Haftung zwischen den Schichten. Neue Einsatzgebiete von PLA entstehen dadurch. Herkömmliches PLA ist brüchig und nicht sehr stark. Dieses PLA kannst du für Anwendungen verwenden, für die du vorher ABS nehmen musstest. Aufgrund der sehr geringen Materialschrumpfung und der Tatsache, dass du kein beheiztes Druckbett benötigst, ist PrimaSELECT PLA sehr einfach in allen FDM / FFF-3D-Druckern zu verarbeiten.
Warping ist kein Thema, um das du dir Gedanken machen musst, wenn du dieses PLA verwendest. Dieses Filament verformt sich nicht, wenn deine 3D-Drucke fertig sind, so wie es bei günstigeren Materialien vorkommt. Diese Eigenschaften machen das Filament auch weniger anfällig für die Aufnahme von Feuchtigkeit. Das ist ein großer Fortschritt und bietet einen großen Vorteil bei der Lagerung. Wenn dein 3D-Drucker mit einem beheizten Druckbett ausgestattet ist, empfehlen wir eine Temperatureinstellung von 40-60 ° C.
Wenn du eine Dual-Hot-End-Einrichtung hast und mit Support-Material 3D-drucken möchtest, empfehlen wir die Verwendung von PrimaSELECT PVA. Dieses Support-Material verbindet sich gut mit unserem ABS und ist leicht zu entfernen. PrimaSELECT PVA ist sogar in Wasser löslich.
PrimaSELECT PLA haftet auf BuildTak oder Glasplatten, die mit Klebstoffspray oder Klebestift beschichtet sind.
PrimaSELECT PLA wird als 750 g hochwertiges Filament auf eine transparente Spule aufgewickelt geliefert. Es ist in einer stabilen Box verpackt und mit Luftentfeuchter versehen, um Feuchtigkeit zu vermeiden.
PrimaSELECT PLA gibt es mit den Durchmessern 1,75 mm und 2,85 mm.
Unsere hochmoderne Fabrik ist mit der neuesten Lasermesstechnik ausgestattet. Die ständige Kontrolle stellt sicher, dass du eine Spule mit sehr geringer Durchmesserabweichung bekommst. Dadurch kannst du PrimaSELECT PLA auf fast allen gängigen 3D-Druckern verarbeiten.
![]() |
---|

PrimaSelect PLA - 2-85 mm - 750 g - metallic-gold
PrimaSELECT™ PLA ist ein sehr vorteilhaftes 3D-Druckmaterial. Es ist ungiftig und frei von unangenehmen Geruch bei der Verarbeitung. Aufgrund seiner thermischen Eigenschaften ist es einfach, super 3D-Druck-Ergebnisse zu erzielen. Filament von Prima Filaments kommt auf einer transparenten Spule. Dadurch kannst du einfach nachschauen, wie viel Filament auf der Spule übrig ist.
Polymilchsäure (PLA) ist ein biologisch abbaubares Polymer. Es wird aus Milchsäure hergestellt, die aus Getreidearten wie Mais fermentiert werden kann.
PrimaSELECT PLA hat einen leichten Glanz, wenn der 3D-Druck fertig ist. PrimaSELECT PLA gibt es in einer großen Auswahl an schönen und leuchtenden Farben. Diese besitzen ein Farbspektrum, welches auf dem RAL-Farbsystem basiert. Dies wiederum garantiert, dass du jedes Mal, wenn du eine neue Filamentspule bestellst, die gleiche Farbe erhältst.
Mit unserem neuen PrimaSELECT PLA ist es uns gelungen, ein PLA zu erstellen, welches genau deinen Bedürfnissen entspricht. PrimaSELECT PLA ist ein sogenanntes modifiziertes PLA. Dadurch ist es etwa 12-mal stärker als gewöhnliches PLA. Dies liegt an dem zugesetzten Additiv, welches mit den besten Rohmaterialien gemischt wurde.
PrimaSELECT PLA fühlt sich etwas weicher an als normales PLA. Es ist auch biegsamer und daher perfekt für alle 3D-Drucker, einschließlich Geräten mit Bowden-Materialförderung.
Die erzielbaren Ergebnisse sind erstaunlich und das Material besitzt eine extrem starke Haftung zwischen den Schichten. Neue Einsatzgebiete von PLA entstehen dadurch. Herkömmliches PLA ist brüchig und nicht sehr stark. Dieses PLA kannst du für Anwendungen verwenden, für die du vorher ABS nehmen musstest. Aufgrund der sehr geringen Materialschrumpfung und der Tatsache, dass du kein beheiztes Druckbett benötigst, ist PrimaSELECT PLA sehr einfach in allen FDM / FFF-3D-Druckern zu verarbeiten.
Warping ist kein Thema, um das du dir Gedanken machen musst, wenn du dieses PLA verwendest. Dieses Filament verformt sich nicht, wenn deine 3D-Drucke fertig sind, so wie es bei günstigeren Materialien vorkommt. Diese Eigenschaften machen das Filament auch weniger anfällig für die Aufnahme von Feuchtigkeit. Das ist ein großer Fortschritt und bietet einen großen Vorteil bei der Lagerung. Wenn dein 3D-Drucker mit einem beheizten Druckbett ausgestattet ist, empfehlen wir eine Temperatureinstellung von 40-60 ° C.
Wenn du eine Dual-Hot-End-Einrichtung hast und mit Support-Material 3D-drucken möchtest, empfehlen wir die Verwendung von PrimaSELECT PVA. Dieses Support-Material verbindet sich gut mit unserem ABS und ist leicht zu entfernen. PrimaSELECT PVA ist sogar in Wasser löslich.
PrimaSELECT PLA haftet auf BuildTak oder Glasplatten, die mit Klebstoffspray oder Klebestift beschichtet sind.
PrimaSELECT PLA wird als 750 g hochwertiges Filament auf eine transparente Spule aufgewickelt geliefert. Es ist in einer stabilen Box verpackt und mit Luftentfeuchter versehen, um Feuchtigkeit zu vermeiden.
PrimaSELECT PLA gibt es mit den Durchmessern 1,75 mm und 2,85 mm.
Unsere hochmoderne Fabrik ist mit der neuesten Lasermesstechnik ausgestattet. Die ständige Kontrolle stellt sicher, dass du eine Spule mit sehr geringer Durchmesserabweichung bekommst. Dadurch kannst du PrimaSELECT PLA auf fast allen gängigen 3D-Druckern verarbeiten.
![]() |
---|

PrimaSelect PLA - 2-85 mm - 750 g - metallic-silber
PrimaSELECT™ PLA ist ein sehr vorteilhaftes 3D-Druckmaterial. Es ist ungiftig und frei von unangenehmen Geruch bei der Verarbeitung. Aufgrund seiner thermischen Eigenschaften ist es einfach, super 3D-Druck-Ergebnisse zu erzielen. Filament von Prima Filaments kommt auf einer transparenten Spule. Dadurch kannst du einfach nachschauen, wie viel Filament auf der Spule übrig ist.
Polymilchsäure (PLA) ist ein biologisch abbaubares Polymer. Es wird aus Milchsäure hergestellt, die aus Getreidearten wie Mais fermentiert werden kann.
PrimaSELECT PLA hat einen leichten Glanz, wenn der 3D-Druck fertig ist. PrimaSELECT PLA gibt es in einer großen Auswahl an schönen und leuchtenden Farben. Diese besitzen ein Farbspektrum, welches auf dem RAL-Farbsystem basiert. Dies wiederum garantiert, dass du jedes Mal, wenn du eine neue Filamentspule bestellst, die gleiche Farbe erhältst.
Mit unserem neuen PrimaSELECT PLA ist es uns gelungen, ein PLA zu erstellen, welches genau deinen Bedürfnissen entspricht. PrimaSELECT PLA ist ein sogenanntes modifiziertes PLA. Dadurch ist es etwa 12-mal stärker als gewöhnliches PLA. Dies liegt an dem zugesetzten Additiv, welches mit den besten Rohmaterialien gemischt wurde.
PrimaSELECT PLA fühlt sich etwas weicher an als normales PLA. Es ist auch biegsamer und daher perfekt für alle 3D-Drucker, einschließlich Geräten mit Bowden-Materialförderung.
Die erzielbaren Ergebnisse sind erstaunlich und das Material besitzt eine extrem starke Haftung zwischen den Schichten. Neue Einsatzgebiete von PLA entstehen dadurch. Herkömmliches PLA ist brüchig und nicht sehr stark. Dieses PLA kannst du für Anwendungen verwenden, für die du vorher ABS nehmen musstest. Aufgrund der sehr geringen Materialschrumpfung und der Tatsache, dass du kein beheiztes Druckbett benötigst, ist PrimaSELECT PLA sehr einfach in allen FDM / FFF-3D-Druckern zu verarbeiten.
Warping ist kein Thema, um das du dir Gedanken machen musst, wenn du dieses PLA verwendest. Dieses Filament verformt sich nicht, wenn deine 3D-Drucke fertig sind, so wie es bei günstigeren Materialien vorkommt. Diese Eigenschaften machen das Filament auch weniger anfällig für die Aufnahme von Feuchtigkeit. Das ist ein großer Fortschritt und bietet einen großen Vorteil bei der Lagerung. Wenn dein 3D-Drucker mit einem beheizten Druckbett ausgestattet ist, empfehlen wir eine Temperatureinstellung von 40-60 ° C.
Wenn du eine Dual-Hot-End-Einrichtung hast und mit Support-Material 3D-drucken möchtest, empfehlen wir die Verwendung von PrimaSELECT PVA. Dieses Support-Material verbindet sich gut mit unserem ABS und ist leicht zu entfernen. PrimaSELECT PVA ist sogar in Wasser löslich.
PrimaSELECT PLA haftet auf BuildTak oder Glasplatten, die mit Klebstoffspray oder Klebestift beschichtet sind.
PrimaSELECT PLA wird als 750 g hochwertiges Filament auf eine transparente Spule aufgewickelt geliefert. Es ist in einer stabilen Box verpackt und mit Luftentfeuchter versehen, um Feuchtigkeit zu vermeiden.
PrimaSELECT PLA gibt es mit den Durchmessern 1,75 mm und 2,85 mm.
Unsere hochmoderne Fabrik ist mit der neuesten Lasermesstechnik ausgestattet. Die ständige Kontrolle stellt sicher, dass du eine Spule mit sehr geringer Durchmesserabweichung bekommst. Dadurch kannst du PrimaSELECT PLA auf fast allen gängigen 3D-Druckern verarbeiten.
![]() |
---|

PrimaSelect PLA - 2-85 mm - 750 g - metallic-blau
PrimaSELECT™ PLA ist ein sehr vorteilhaftes 3D-Druckmaterial. Es ist ungiftig und frei von unangenehmen Geruch bei der Verarbeitung. Aufgrund seiner thermischen Eigenschaften ist es einfach, super 3D-Druck-Ergebnisse zu erzielen. Filament von Prima Filaments kommt auf einer transparenten Spule. Dadurch kannst du einfach nachschauen, wie viel Filament auf der Spule übrig ist.
Polymilchsäure (PLA) ist ein biologisch abbaubares Polymer. Es wird aus Milchsäure hergestellt, die aus Getreidearten wie Mais fermentiert werden kann.
PrimaSELECT PLA hat einen leichten Glanz, wenn der 3D-Druck fertig ist. PrimaSELECT PLA gibt es in einer großen Auswahl an schönen und leuchtenden Farben. Diese besitzen ein Farbspektrum, welches auf dem RAL-Farbsystem basiert. Dies wiederum garantiert, dass du jedes Mal, wenn du eine neue Filamentspule bestellst, die gleiche Farbe erhältst.
Mit unserem neuen PrimaSELECT PLA ist es uns gelungen, ein PLA zu erstellen, welches genau deinen Bedürfnissen entspricht. PrimaSELECT PLA ist ein sogenanntes modifiziertes PLA. Dadurch ist es etwa 12-mal stärker als gewöhnliches PLA. Dies liegt an dem zugesetzten Additiv, welches mit den besten Rohmaterialien gemischt wurde.
PrimaSELECT PLA fühlt sich etwas weicher an als normales PLA. Es ist auch biegsamer und daher perfekt für alle 3D-Drucker, einschließlich Geräten mit Bowden-Materialförderung.
Die erzielbaren Ergebnisse sind erstaunlich und das Material besitzt eine extrem starke Haftung zwischen den Schichten. Neue Einsatzgebiete von PLA entstehen dadurch. Herkömmliches PLA ist brüchig und nicht sehr stark. Dieses PLA kannst du für Anwendungen verwenden, für die du vorher ABS nehmen musstest. Aufgrund der sehr geringen Materialschrumpfung und der Tatsache, dass du kein beheiztes Druckbett benötigst, ist PrimaSELECT PLA sehr einfach in allen FDM / FFF-3D-Druckern zu verarbeiten.
Warping ist kein Thema, um das du dir Gedanken machen musst, wenn du dieses PLA verwendest. Dieses Filament verformt sich nicht, wenn deine 3D-Drucke fertig sind, so wie es bei günstigeren Materialien vorkommt. Diese Eigenschaften machen das Filament auch weniger anfällig für die Aufnahme von Feuchtigkeit. Das ist ein großer Fortschritt und bietet einen großen Vorteil bei der Lagerung. Wenn dein 3D-Drucker mit einem beheizten Druckbett ausgestattet ist, empfehlen wir eine Temperatureinstellung von 40-60 ° C.
Wenn du eine Dual-Hot-End-Einrichtung hast und mit Support-Material 3D-drucken möchtest, empfehlen wir die Verwendung von PrimaSELECT PVA. Dieses Support-Material verbindet sich gut mit unserem ABS und ist leicht zu entfernen. PrimaSELECT PVA ist sogar in Wasser löslich.
PrimaSELECT PLA haftet auf BuildTak oder Glasplatten, die mit Klebstoffspray oder Klebestift beschichtet sind.
PrimaSELECT PLA wird als 750 g hochwertiges Filament auf eine transparente Spule aufgewickelt geliefert. Es ist in einer stabilen Box verpackt und mit Luftentfeuchter versehen, um Feuchtigkeit zu vermeiden.
PrimaSELECT PLA gibt es mit den Durchmessern 1,75 mm und 2,85 mm.
Unsere hochmoderne Fabrik ist mit der neuesten Lasermesstechnik ausgestattet. Die ständige Kontrolle stellt sicher, dass du eine Spule mit sehr geringer Durchmesserabweichung bekommst. Dadurch kannst du PrimaSELECT PLA auf fast allen gängigen 3D-Druckern verarbeiten.
![]() |
---|

PrimaSelect PLA - 2-85 mm - 750 g - metallic-grün
PrimaSELECT™ PLA ist ein sehr vorteilhaftes 3D-Druckmaterial. Es ist ungiftig und frei von unangenehmen Geruch bei der Verarbeitung. Aufgrund seiner thermischen Eigenschaften ist es einfach, super 3D-Druck-Ergebnisse zu erzielen. Filament von Prima Filaments kommt auf einer transparenten Spule. Dadurch kannst du einfach nachschauen, wie viel Filament auf der Spule übrig ist.
Polymilchsäure (PLA) ist ein biologisch abbaubares Polymer. Es wird aus Milchsäure hergestellt, die aus Getreidearten wie Mais fermentiert werden kann.
PrimaSELECT PLA hat einen leichten Glanz, wenn der 3D-Druck fertig ist. PrimaSELECT PLA gibt es in einer großen Auswahl an schönen und leuchtenden Farben. Diese besitzen ein Farbspektrum, welches auf dem RAL-Farbsystem basiert. Dies wiederum garantiert, dass du jedes Mal, wenn du eine neue Filamentspule bestellst, die gleiche Farbe erhältst.
Mit unserem neuen PrimaSELECT PLA ist es uns gelungen, ein PLA zu erstellen, welches genau deinen Bedürfnissen entspricht. PrimaSELECT PLA ist ein sogenanntes modifiziertes PLA. Dadurch ist es etwa 12-mal stärker als gewöhnliches PLA. Dies liegt an dem zugesetzten Additiv, welches mit den besten Rohmaterialien gemischt wurde.
PrimaSELECT PLA fühlt sich etwas weicher an als normales PLA. Es ist auch biegsamer und daher perfekt für alle 3D-Drucker, einschließlich Geräten mit Bowden-Materialförderung.
Die erzielbaren Ergebnisse sind erstaunlich und das Material besitzt eine extrem starke Haftung zwischen den Schichten. Neue Einsatzgebiete von PLA entstehen dadurch. Herkömmliches PLA ist brüchig und nicht sehr stark. Dieses PLA kannst du für Anwendungen verwenden, für die du vorher ABS nehmen musstest. Aufgrund der sehr geringen Materialschrumpfung und der Tatsache, dass du kein beheiztes Druckbett benötigst, ist PrimaSELECT PLA sehr einfach in allen FDM / FFF-3D-Druckern zu verarbeiten.
Warping ist kein Thema, um das du dir Gedanken machen musst, wenn du dieses PLA verwendest. Dieses Filament verformt sich nicht, wenn deine 3D-Drucke fertig sind, so wie es bei günstigeren Materialien vorkommt. Diese Eigenschaften machen das Filament auch weniger anfällig für die Aufnahme von Feuchtigkeit. Das ist ein großer Fortschritt und bietet einen großen Vorteil bei der Lagerung. Wenn dein 3D-Drucker mit einem beheizten Druckbett ausgestattet ist, empfehlen wir eine Temperatureinstellung von 40-60 ° C.
Wenn du eine Dual-Hot-End-Einrichtung hast und mit Support-Material 3D-drucken möchtest, empfehlen wir die Verwendung von PrimaSELECT PVA. Dieses Support-Material verbindet sich gut mit unserem ABS und ist leicht zu entfernen. PrimaSELECT PVA ist sogar in Wasser löslich.
PrimaSELECT PLA haftet auf BuildTak oder Glasplatten, die mit Klebstoffspray oder Klebestift beschichtet sind.
PrimaSELECT PLA wird als 750 g hochwertiges Filament auf eine transparente Spule aufgewickelt geliefert. Es ist in einer stabilen Box verpackt und mit Luftentfeuchter versehen, um Feuchtigkeit zu vermeiden.
PrimaSELECT PLA gibt es mit den Durchmessern 1,75 mm und 2,85 mm.
Unsere hochmoderne Fabrik ist mit der neuesten Lasermesstechnik ausgestattet. Die ständige Kontrolle stellt sicher, dass du eine Spule mit sehr geringer Durchmesserabweichung bekommst. Dadurch kannst du PrimaSELECT PLA auf fast allen gängigen 3D-Druckern verarbeiten.
![]() |
---|

PrimaSelect PLA - 2-85mm - 750 g - metallic-rot
PrimaSELECT™ PLA ist ein sehr vorteilhaftes 3D-Druckmaterial. Es ist ungiftig und frei von unangenehmen Geruch bei der Verarbeitung. Aufgrund seiner thermischen Eigenschaften ist es einfach, super 3D-Druck-Ergebnisse zu erzielen. Filament von Prima Filaments kommt auf einer transparenten Spule. Dadurch kannst du einfach nachschauen, wie viel Filament auf der Spule übrig ist.
Polymilchsäure (PLA) ist ein biologisch abbaubares Polymer. Es wird aus Milchsäure hergestellt, die aus Getreidearten wie Mais fermentiert werden kann.
PrimaSELECT PLA hat einen leichten Glanz, wenn der 3D-Druck fertig ist. PrimaSELECT PLA gibt es in einer großen Auswahl an schönen und leuchtenden Farben. Diese besitzen ein Farbspektrum, welches auf dem RAL-Farbsystem basiert. Dies wiederum garantiert, dass du jedes Mal, wenn du eine neue Filamentspule bestellst, die gleiche Farbe erhältst.
Mit unserem neuen PrimaSELECT PLA ist es uns gelungen, ein PLA zu erstellen, welches genau deinen Bedürfnissen entspricht. PrimaSELECT PLA ist ein sogenanntes modifiziertes PLA. Dadurch ist es etwa 12-mal stärker als gewöhnliches PLA. Dies liegt an dem zugesetzten Additiv, welches mit den besten Rohmaterialien gemischt wurde.
PrimaSELECT PLA fühlt sich etwas weicher an als normales PLA. Es ist auch biegsamer und daher perfekt für alle 3D-Drucker, einschließlich Geräten mit Bowden-Materialförderung.
Die erzielbaren Ergebnisse sind erstaunlich und das Material besitzt eine extrem starke Haftung zwischen den Schichten. Neue Einsatzgebiete von PLA entstehen dadurch. Herkömmliches PLA ist brüchig und nicht sehr stark. Dieses PLA kannst du für Anwendungen verwenden, für die du vorher ABS nehmen musstest. Aufgrund der sehr geringen Materialschrumpfung und der Tatsache, dass du kein beheiztes Druckbett benötigst, ist PrimaSELECT PLA sehr einfach in allen FDM / FFF-3D-Druckern zu verarbeiten.
Warping ist kein Thema, um das du dir Gedanken machen musst, wenn du dieses PLA verwendest. Dieses Filament verformt sich nicht, wenn deine 3D-Drucke fertig sind, so wie es bei günstigeren Materialien vorkommt. Diese Eigenschaften machen das Filament auch weniger anfällig für die Aufnahme von Feuchtigkeit. Das ist ein großer Fortschritt und bietet einen großen Vorteil bei der Lagerung. Wenn dein 3D-Drucker mit einem beheizten Druckbett ausgestattet ist, empfehlen wir eine Temperatureinstellung von 40-60 ° C.
Wenn du eine Dual-Hot-End-Einrichtung hast und mit Support-Material 3D-drucken möchtest, empfehlen wir die Verwendung von PrimaSELECT PVA. Dieses Support-Material verbindet sich gut mit unserem ABS und ist leicht zu entfernen. PrimaSELECT PVA ist sogar in Wasser löslich.
PrimaSELECT PLA haftet auf BuildTak oder Glasplatten, die mit Klebstoffspray oder Klebestift beschichtet sind.
PrimaSELECT PLA wird als 750 g hochwertiges Filament auf eine transparente Spule aufgewickelt geliefert. Es ist in einer stabilen Box verpackt und mit Luftentfeuchter versehen, um Feuchtigkeit zu vermeiden.
PrimaSELECT PLA gibt es mit den Durchmessern 1,75 mm und 2,85 mm.
Unsere hochmoderne Fabrik ist mit der neuesten Lasermesstechnik ausgestattet. Die ständige Kontrolle stellt sicher, dass du eine Spule mit sehr geringer Durchmesserabweichung bekommst. Dadurch kannst du PrimaSELECT PLA auf fast allen gängigen 3D-Druckern verarbeiten.
![]() |
---|

PrimaSelect PLA - 1-75 mm - 750 g - metallic-grau
PrimaSELECT™ PLA ist ein sehr vorteilhaftes 3D-Druckmaterial. Es ist ungiftig und frei von unangenehmen Geruch bei der Verarbeitung. Aufgrund seiner thermischen Eigenschaften ist es einfach, super 3D-Druck-Ergebnisse zu erzielen. Filament von Prima Filaments kommt auf einer transparenten Spule. Dadurch kannst du einfach nachschauen, wie viel Filament auf der Spule übrig ist.
Polymilchsäure (PLA) ist ein biologisch abbaubares Polymer. Es wird aus Milchsäure hergestellt, die aus Getreidearten wie Mais fermentiert werden kann.
PrimaSELECT PLA hat einen leichten Glanz, wenn der 3D-Druck fertig ist. PrimaSELECT PLA gibt es in einer großen Auswahl an schönen und leuchtenden Farben. Diese besitzen ein Farbspektrum, welches auf dem RAL-Farbsystem basiert. Dies wiederum garantiert, dass du jedes Mal, wenn du eine neue Filamentspule bestellst, die gleiche Farbe erhältst.
Mit unserem neuen PrimaSELECT PLA ist es uns gelungen, ein PLA zu erstellen, welches genau deinen Bedürfnissen entspricht. PrimaSELECT PLA ist ein sogenanntes modifiziertes PLA. Dadurch ist es etwa 12-mal stärker als gewöhnliches PLA. Dies liegt an dem zugesetzten Additiv, welches mit den besten Rohmaterialien gemischt wurde.
PrimaSELECT PLA fühlt sich etwas weicher an als normales PLA. Es ist auch biegsamer und daher perfekt für alle 3D-Drucker, einschließlich Geräten mit Bowden-Materialförderung.
Die erzielbaren Ergebnisse sind erstaunlich und das Material besitzt eine extrem starke Haftung zwischen den Schichten. Neue Einsatzgebiete von PLA entstehen dadurch. Herkömmliches PLA ist brüchig und nicht sehr stark. Dieses PLA kannst du für Anwendungen verwenden, für die du vorher ABS nehmen musstest. Aufgrund der sehr geringen Materialschrumpfung und der Tatsache, dass du kein beheiztes Druckbett benötigst, ist PrimaSELECT PLA sehr einfach in allen FDM / FFF-3D-Druckern zu verarbeiten.
Warping ist kein Thema, um das du dir Gedanken machen musst, wenn du dieses PLA verwendest. Dieses Filament verformt sich nicht, wenn deine 3D-Drucke fertig sind, so wie es bei günstigeren Materialien vorkommt. Diese Eigenschaften machen das Filament auch weniger anfällig für die Aufnahme von Feuchtigkeit. Das ist ein großer Fortschritt und bietet einen großen Vorteil bei der Lagerung. Wenn dein 3D-Drucker mit einem beheizten Druckbett ausgestattet ist, empfehlen wir eine Temperatureinstellung von 40-60 ° C.
Wenn du eine Dual-Hot-End-Einrichtung hast und mit Support-Material 3D-drucken möchtest, empfehlen wir die Verwendung von PrimaSELECT PVA. Dieses Support-Material verbindet sich gut mit unserem ABS und ist leicht zu entfernen. PrimaSELECT PVA ist sogar in Wasser löslich.
PrimaSELECT PLA haftet auf BuildTak oder Glasplatten, die mit Klebstoffspray oder Klebestift beschichtet sind.
PrimaSELECT PLA wird als 750 g hochwertiges Filament auf eine transparente Spule aufgewickelt geliefert. Es ist in einer stabilen Box verpackt und mit Luftentfeuchter versehen, um Feuchtigkeit zu vermeiden.
PrimaSELECT PLA gibt es mit den Durchmessern 1,75 mm und 2,85 mm.
Unsere hochmoderne Fabrik ist mit der neuesten Lasermesstechnik ausgestattet. Die ständige Kontrolle stellt sicher, dass du eine Spule mit sehr geringer Durchmesserabweichung bekommst. Dadurch kannst du PrimaSELECT PLA auf fast allen gängigen 3D-Druckern verarbeiten.
![]() |
---|

PrimaSelect PLA - 1-75 mm - 750 g - metallic-gold
PrimaSELECT™ PLA ist ein sehr vorteilhaftes 3D-Druckmaterial. Es ist ungiftig und frei von unangenehmen Geruch bei der Verarbeitung. Aufgrund seiner thermischen Eigenschaften ist es einfach, super 3D-Druck-Ergebnisse zu erzielen. Filament von Prima Filaments kommt auf einer transparenten Spule. Dadurch kannst du einfach nachschauen, wie viel Filament auf der Spule übrig ist.
Polymilchsäure (PLA) ist ein biologisch abbaubares Polymer. Es wird aus Milchsäure hergestellt, die aus Getreidearten wie Mais fermentiert werden kann.
PrimaSELECT PLA hat einen leichten Glanz, wenn der 3D-Druck fertig ist. PrimaSELECT PLA gibt es in einer großen Auswahl an schönen und leuchtenden Farben. Diese besitzen ein Farbspektrum, welches auf dem RAL-Farbsystem basiert. Dies wiederum garantiert, dass du jedes Mal, wenn du eine neue Filamentspule bestellst, die gleiche Farbe erhältst.
Mit unserem neuen PrimaSELECT PLA ist es uns gelungen, ein PLA zu erstellen, welches genau deinen Bedürfnissen entspricht. PrimaSELECT PLA ist ein sogenanntes modifiziertes PLA. Dadurch ist es etwa 12-mal stärker als gewöhnliches PLA. Dies liegt an dem zugesetzten Additiv, welches mit den besten Rohmaterialien gemischt wurde.
PrimaSELECT PLA fühlt sich etwas weicher an als normales PLA. Es ist auch biegsamer und daher perfekt für alle 3D-Drucker, einschließlich Geräten mit Bowden-Materialförderung.
Die erzielbaren Ergebnisse sind erstaunlich und das Material besitzt eine extrem starke Haftung zwischen den Schichten. Neue Einsatzgebiete von PLA entstehen dadurch. Herkömmliches PLA ist brüchig und nicht sehr stark. Dieses PLA kannst du für Anwendungen verwenden, für die du vorher ABS nehmen musstest. Aufgrund der sehr geringen Materialschrumpfung und der Tatsache, dass du kein beheiztes Druckbett benötigst, ist PrimaSELECT PLA sehr einfach in allen FDM / FFF-3D-Druckern zu verarbeiten.
Warping ist kein Thema, um das du dir Gedanken machen musst, wenn du dieses PLA verwendest. Dieses Filament verformt sich nicht, wenn deine 3D-Drucke fertig sind, so wie es bei günstigeren Materialien vorkommt. Diese Eigenschaften machen das Filament auch weniger anfällig für die Aufnahme von Feuchtigkeit. Das ist ein großer Fortschritt und bietet einen großen Vorteil bei der Lagerung. Wenn dein 3D-Drucker mit einem beheizten Druckbett ausgestattet ist, empfehlen wir eine Temperatureinstellung von 40-60 ° C.
Wenn du eine Dual-Hot-End-Einrichtung hast und mit Support-Material 3D-drucken möchtest, empfehlen wir die Verwendung von PrimaSELECT PVA. Dieses Support-Material verbindet sich gut mit unserem ABS und ist leicht zu entfernen. PrimaSELECT PVA ist sogar in Wasser löslich.
PrimaSELECT PLA haftet auf BuildTak oder Glasplatten, die mit Klebstoffspray oder Klebestift beschichtet sind.
PrimaSELECT PLA wird als 750 g hochwertiges Filament auf eine transparente Spule aufgewickelt geliefert. Es ist in einer stabilen Box verpackt und mit Luftentfeuchter versehen, um Feuchtigkeit zu vermeiden.
PrimaSELECT PLA gibt es mit den Durchmessern 1,75 mm und 2,85 mm.
Unsere hochmoderne Fabrik ist mit der neuesten Lasermesstechnik ausgestattet. Die ständige Kontrolle stellt sicher, dass du eine Spule mit sehr geringer Durchmesserabweichung bekommst. Dadurch kannst du PrimaSELECT PLA auf fast allen gängigen 3D-Druckern verarbeiten.
![]() |
---|

PrimaSelect PLA - 1-75 mm - 750 g - metallic-silber
PrimaSELECT™ PLA ist ein sehr vorteilhaftes 3D-Druckmaterial. Es ist ungiftig und frei von unangenehmen Geruch bei der Verarbeitung. Aufgrund seiner thermischen Eigenschaften ist es einfach, super 3D-Druck-Ergebnisse zu erzielen. Filament von Prima Filaments kommt auf einer transparenten Spule. Dadurch kannst du einfach nachschauen, wie viel Filament auf der Spule übrig ist.
Polymilchsäure (PLA) ist ein biologisch abbaubares Polymer. Es wird aus Milchsäure hergestellt, die aus Getreidearten wie Mais fermentiert werden kann.
PrimaSELECT PLA hat einen leichten Glanz, wenn der 3D-Druck fertig ist. PrimaSELECT PLA gibt es in einer großen Auswahl an schönen und leuchtenden Farben. Diese besitzen ein Farbspektrum, welches auf dem RAL-Farbsystem basiert. Dies wiederum garantiert, dass du jedes Mal, wenn du eine neue Filamentspule bestellst, die gleiche Farbe erhältst.
Mit unserem neuen PrimaSELECT PLA ist es uns gelungen, ein PLA zu erstellen, welches genau deinen Bedürfnissen entspricht. PrimaSELECT PLA ist ein sogenanntes modifiziertes PLA. Dadurch ist es etwa 12-mal stärker als gewöhnliches PLA. Dies liegt an dem zugesetzten Additiv, welches mit den besten Rohmaterialien gemischt wurde.
PrimaSELECT PLA fühlt sich etwas weicher an als normales PLA. Es ist auch biegsamer und daher perfekt für alle 3D-Drucker, einschließlich Geräten mit Bowden-Materialförderung.
Die erzielbaren Ergebnisse sind erstaunlich und das Material besitzt eine extrem starke Haftung zwischen den Schichten. Neue Einsatzgebiete von PLA entstehen dadurch. Herkömmliches PLA ist brüchig und nicht sehr stark. Dieses PLA kannst du für Anwendungen verwenden, für die du vorher ABS nehmen musstest. Aufgrund der sehr geringen Materialschrumpfung und der Tatsache, dass du kein beheiztes Druckbett benötigst, ist PrimaSELECT PLA sehr einfach in allen FDM / FFF-3D-Druckern zu verarbeiten.
Warping ist kein Thema, um das du dir Gedanken machen musst, wenn du dieses PLA verwendest. Dieses Filament verformt sich nicht, wenn deine 3D-Drucke fertig sind, so wie es bei günstigeren Materialien vorkommt. Diese Eigenschaften machen das Filament auch weniger anfällig für die Aufnahme von Feuchtigkeit. Das ist ein großer Fortschritt und bietet einen großen Vorteil bei der Lagerung. Wenn dein 3D-Drucker mit einem beheizten Druckbett ausgestattet ist, empfehlen wir eine Temperatureinstellung von 40-60 ° C.
Wenn du eine Dual-Hot-End-Einrichtung hast und mit Support-Material 3D-drucken möchtest, empfehlen wir die Verwendung von PrimaSELECT PVA. Dieses Support-Material verbindet sich gut mit unserem ABS und ist leicht zu entfernen. PrimaSELECT PVA ist sogar in Wasser löslich.
PrimaSELECT PLA haftet auf BuildTak oder Glasplatten, die mit Klebstoffspray oder Klebestift beschichtet sind.
PrimaSELECT PLA wird als 750 g hochwertiges Filament auf eine transparente Spule aufgewickelt geliefert. Es ist in einer stabilen Box verpackt und mit Luftentfeuchter versehen, um Feuchtigkeit zu vermeiden.
PrimaSELECT PLA gibt es mit den Durchmessern 1,75 mm und 2,85 mm.
Unsere hochmoderne Fabrik ist mit der neuesten Lasermesstechnik ausgestattet. Die ständige Kontrolle stellt sicher, dass du eine Spule mit sehr geringer Durchmesserabweichung bekommst. Dadurch kannst du PrimaSELECT PLA auf fast allen gängigen 3D-Druckern verarbeiten.
![]() |
---|

PrimaSelect PLA - 1-75 mm - 750 g - metallic-blau
PrimaSELECT™ PLA ist ein sehr vorteilhaftes 3D-Druckmaterial. Es ist ungiftig und frei von unangenehmen Geruch bei der Verarbeitung. Aufgrund seiner thermischen Eigenschaften ist es einfach, super 3D-Druck-Ergebnisse zu erzielen. Filament von Prima Filaments kommt auf einer transparenten Spule. Dadurch kannst du einfach nachschauen, wie viel Filament auf der Spule übrig ist.
Polymilchsäure (PLA) ist ein biologisch abbaubares Polymer. Es wird aus Milchsäure hergestellt, die aus Getreidearten wie Mais fermentiert werden kann.
PrimaSELECT PLA hat einen leichten Glanz, wenn der 3D-Druck fertig ist. PrimaSELECT PLA gibt es in einer großen Auswahl an schönen und leuchtenden Farben. Diese besitzen ein Farbspektrum, welches auf dem RAL-Farbsystem basiert. Dies wiederum garantiert, dass du jedes Mal, wenn du eine neue Filamentspule bestellst, die gleiche Farbe erhältst.
Mit unserem neuen PrimaSELECT PLA ist es uns gelungen, ein PLA zu erstellen, welches genau deinen Bedürfnissen entspricht. PrimaSELECT PLA ist ein sogenanntes modifiziertes PLA. Dadurch ist es etwa 12-mal stärker als gewöhnliches PLA. Dies liegt an dem zugesetzten Additiv, welches mit den besten Rohmaterialien gemischt wurde.
PrimaSELECT PLA fühlt sich etwas weicher an als normales PLA. Es ist auch biegsamer und daher perfekt für alle 3D-Drucker, einschließlich Geräten mit Bowden-Materialförderung.
Die erzielbaren Ergebnisse sind erstaunlich und das Material besitzt eine extrem starke Haftung zwischen den Schichten. Neue Einsatzgebiete von PLA entstehen dadurch. Herkömmliches PLA ist brüchig und nicht sehr stark. Dieses PLA kannst du für Anwendungen verwenden, für die du vorher ABS nehmen musstest. Aufgrund der sehr geringen Materialschrumpfung und der Tatsache, dass du kein beheiztes Druckbett benötigst, ist PrimaSELECT PLA sehr einfach in allen FDM / FFF-3D-Druckern zu verarbeiten.
Warping ist kein Thema, um das du dir Gedanken machen musst, wenn du dieses PLA verwendest. Dieses Filament verformt sich nicht, wenn deine 3D-Drucke fertig sind, so wie es bei günstigeren Materialien vorkommt. Diese Eigenschaften machen das Filament auch weniger anfällig für die Aufnahme von Feuchtigkeit. Das ist ein großer Fortschritt und bietet einen großen Vorteil bei der Lagerung. Wenn dein 3D-Drucker mit einem beheizten Druckbett ausgestattet ist, empfehlen wir eine Temperatureinstellung von 40-60 ° C.
Wenn du eine Dual-Hot-End-Einrichtung hast und mit Support-Material 3D-drucken möchtest, empfehlen wir die Verwendung von PrimaSELECT PVA. Dieses Support-Material verbindet sich gut mit unserem ABS und ist leicht zu entfernen. PrimaSELECT PVA ist sogar in Wasser löslich.
PrimaSELECT PLA haftet auf BuildTak oder Glasplatten, die mit Klebstoffspray oder Klebestift beschichtet sind.
PrimaSELECT PLA wird als 750 g hochwertiges Filament auf eine transparente Spule aufgewickelt geliefert. Es ist in einer stabilen Box verpackt und mit Luftentfeuchter versehen, um Feuchtigkeit zu vermeiden.
PrimaSELECT PLA gibt es mit den Durchmessern 1,75 mm und 2,85 mm.
Unsere hochmoderne Fabrik ist mit der neuesten Lasermesstechnik ausgestattet. Die ständige Kontrolle stellt sicher, dass du eine Spule mit sehr geringer Durchmesserabweichung bekommst. Dadurch kannst du PrimaSELECT PLA auf fast allen gängigen 3D-Druckern verarbeiten.
![]() |
---|

PrimaSelect PLA - 1-75 mm - 750 g - metallic-grün
PrimaSELECT™ PLA ist ein sehr vorteilhaftes 3D-Druckmaterial. Es ist ungiftig und frei von unangenehmen Geruch bei der Verarbeitung. Aufgrund seiner thermischen Eigenschaften ist es einfach, super 3D-Druck-Ergebnisse zu erzielen. Filament von Prima Filaments kommt auf einer transparenten Spule. Dadurch kannst du einfach nachschauen, wie viel Filament auf der Spule übrig ist.
Polymilchsäure (PLA) ist ein biologisch abbaubares Polymer. Es wird aus Milchsäure hergestellt, die aus Getreidearten wie Mais fermentiert werden kann.
PrimaSELECT PLA hat einen leichten Glanz, wenn der 3D-Druck fertig ist. PrimaSELECT PLA gibt es in einer großen Auswahl an schönen und leuchtenden Farben. Diese besitzen ein Farbspektrum, welches auf dem RAL-Farbsystem basiert. Dies wiederum garantiert, dass du jedes Mal, wenn du eine neue Filamentspule bestellst, die gleiche Farbe erhältst.
Mit unserem neuen PrimaSELECT PLA ist es uns gelungen, ein PLA zu erstellen, welches genau deinen Bedürfnissen entspricht. PrimaSELECT PLA ist ein sogenanntes modifiziertes PLA. Dadurch ist es etwa 12-mal stärker als gewöhnliches PLA. Dies liegt an dem zugesetzten Additiv, welches mit den besten Rohmaterialien gemischt wurde.
PrimaSELECT PLA fühlt sich etwas weicher an als normales PLA. Es ist auch biegsamer und daher perfekt für alle 3D-Drucker, einschließlich Geräten mit Bowden-Materialförderung.
Die erzielbaren Ergebnisse sind erstaunlich und das Material besitzt eine extrem starke Haftung zwischen den Schichten. Neue Einsatzgebiete von PLA entstehen dadurch. Herkömmliches PLA ist brüchig und nicht sehr stark. Dieses PLA kannst du für Anwendungen verwenden, für die du vorher ABS nehmen musstest. Aufgrund der sehr geringen Materialschrumpfung und der Tatsache, dass du kein beheiztes Druckbett benötigst, ist PrimaSELECT PLA sehr einfach in allen FDM / FFF-3D-Druckern zu verarbeiten.
Warping ist kein Thema, um das du dir Gedanken machen musst, wenn du dieses PLA verwendest. Dieses Filament verformt sich nicht, wenn deine 3D-Drucke fertig sind, so wie es bei günstigeren Materialien vorkommt. Diese Eigenschaften machen das Filament auch weniger anfällig für die Aufnahme von Feuchtigkeit. Das ist ein großer Fortschritt und bietet einen großen Vorteil bei der Lagerung. Wenn dein 3D-Drucker mit einem beheizten Druckbett ausgestattet ist, empfehlen wir eine Temperatureinstellung von 40-60 ° C.
Wenn du eine Dual-Hot-End-Einrichtung hast und mit Support-Material 3D-drucken möchtest, empfehlen wir die Verwendung von PrimaSELECT PVA. Dieses Support-Material verbindet sich gut mit unserem ABS und ist leicht zu entfernen. PrimaSELECT PVA ist sogar in Wasser löslich.
PrimaSELECT PLA haftet auf BuildTak oder Glasplatten, die mit Klebstoffspray oder Klebestift beschichtet sind.
PrimaSELECT PLA wird als 750 g hochwertiges Filament auf eine transparente Spule aufgewickelt geliefert. Es ist in einer stabilen Box verpackt und mit Luftentfeuchter versehen, um Feuchtigkeit zu vermeiden.
PrimaSELECT PLA gibt es mit den Durchmessern 1,75 mm und 2,85 mm.
Unsere hochmoderne Fabrik ist mit der neuesten Lasermesstechnik ausgestattet. Die ständige Kontrolle stellt sicher, dass du eine Spule mit sehr geringer Durchmesserabweichung bekommst. Dadurch kannst du PrimaSELECT PLA auf fast allen gängigen 3D-Druckern verarbeiten.
![]() |
---|

PrimaSelect PLA - 1-75 mm - 750 g - metallic-rot
PrimaSELECT™ PLA ist ein sehr vorteilhaftes 3D-Druckmaterial. Es ist ungiftig und frei von unangenehmen Geruch bei der Verarbeitung. Aufgrund seiner thermischen Eigenschaften ist es einfach, super 3D-Druck-Ergebnisse zu erzielen. Filament von Prima Filaments kommt auf einer transparenten Spule. Dadurch kannst du einfach nachschauen, wie viel Filament auf der Spule übrig ist.
Polymilchsäure (PLA) ist ein biologisch abbaubares Polymer. Es wird aus Milchsäure hergestellt, die aus Getreidearten wie Mais fermentiert werden kann.
PrimaSELECT PLA hat einen leichten Glanz, wenn der 3D-Druck fertig ist. PrimaSELECT PLA gibt es in einer großen Auswahl an schönen und leuchtenden Farben. Diese besitzen ein Farbspektrum, welches auf dem RAL-Farbsystem basiert. Dies wiederum garantiert, dass du jedes Mal, wenn du eine neue Filamentspule bestellst, die gleiche Farbe erhältst.
Mit unserem neuen PrimaSELECT PLA ist es uns gelungen, ein PLA zu erstellen, welches genau deinen Bedürfnissen entspricht. PrimaSELECT PLA ist ein sogenanntes modifiziertes PLA. Dadurch ist es etwa 12-mal stärker als gewöhnliches PLA. Dies liegt an dem zugesetzten Additiv, welches mit den besten Rohmaterialien gemischt wurde.
PrimaSELECT PLA fühlt sich etwas weicher an als normales PLA. Es ist auch biegsamer und daher perfekt für alle 3D-Drucker, einschließlich Geräten mit Bowden-Materialförderung.
Die erzielbaren Ergebnisse sind erstaunlich und das Material besitzt eine extrem starke Haftung zwischen den Schichten. Neue Einsatzgebiete von PLA entstehen dadurch. Herkömmliches PLA ist brüchig und nicht sehr stark. Dieses PLA kannst du für Anwendungen verwenden, für die du vorher ABS nehmen musstest. Aufgrund der sehr geringen Materialschrumpfung und der Tatsache, dass du kein beheiztes Druckbett benötigst, ist PrimaSELECT PLA sehr einfach in allen FDM / FFF-3D-Druckern zu verarbeiten.
Warping ist kein Thema, um das du dir Gedanken machen musst, wenn du dieses PLA verwendest. Dieses Filament verformt sich nicht, wenn deine 3D-Drucke fertig sind, so wie es bei günstigeren Materialien vorkommt. Diese Eigenschaften machen das Filament auch weniger anfällig für die Aufnahme von Feuchtigkeit. Das ist ein großer Fortschritt und bietet einen großen Vorteil bei der Lagerung. Wenn dein 3D-Drucker mit einem beheizten Druckbett ausgestattet ist, empfehlen wir eine Temperatureinstellung von 40-60 ° C.
Wenn du eine Dual-Hot-End-Einrichtung hast und mit Support-Material 3D-drucken möchtest, empfehlen wir die Verwendung von PrimaSELECT PVA. Dieses Support-Material verbindet sich gut mit unserem ABS und ist leicht zu entfernen. PrimaSELECT PVA ist sogar in Wasser löslich.
PrimaSELECT PLA haftet auf BuildTak oder Glasplatten, die mit Klebstoffspray oder Klebestift beschichtet sind.
PrimaSELECT PLA wird als 750 g hochwertiges Filament auf eine transparente Spule aufgewickelt geliefert. Es ist in einer stabilen Box verpackt und mit Luftentfeuchter versehen, um Feuchtigkeit zu vermeiden.
PrimaSELECT PLA gibt es mit den Durchmessern 1,75 mm und 2,85 mm.
Unsere hochmoderne Fabrik ist mit der neuesten Lasermesstechnik ausgestattet. Die ständige Kontrolle stellt sicher, dass du eine Spule mit sehr geringer Durchmesserabweichung bekommst. Dadurch kannst du PrimaSELECT PLA auf fast allen gängigen 3D-Druckern verarbeiten.
![]() |
---|

EasyPrint PLA Probe - 2-85 mm - 50 g - tranparent
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 2-85 mm - 50 g - gold
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 2-85 mm - 50 g - silber
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 2-85 mm - 50 g - green
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 2-85 mm - 50 g - dunkelgrau
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 2-85 mm - 50 g - hellgrau
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 2-85 mm - 50 g - natural
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 2-85 mm - 50 g - blau
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 2-85 mm - 50 g - rot
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 2-85 mm - 50 g - weiss
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 2-85 mm - 50 g - schwarz
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 1-75 mm - 50 g - bronze
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 1-75 mm - 50 g - transparent blau
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 1-75 mm - 50 g - grün
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 1-75 mm - 50 g - hellgrau
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 1-75 mm - 50 g - natural
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 1-75 mm - 50 g - blau
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 1-75 mm - 50 g - weiss
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

EasyPrint PLA Probe - 1-75 mm - 50 g - schwarz
Sample pack of our EasyPrint PLA series.
50 gram of filament.
EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.
Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.
EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.
Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.
EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.
- Wide Temperature span
Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°
- Perfect diameter tolerance
EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging
- Continuously monitored
During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm
- Perfect spooling
When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.
- Non-toxic and biodegradable
EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.
- Length indicator on spool
Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.
- EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°
- EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.
- EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.
![]() |
---|

CreatBot Messing Nozzle 1-0 mm-1 Stk
CreatBot Brass Nozzle 1,0 mm
Compatible with: CreatBot DX, DX Plus and DE
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.
All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.
For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.
The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.
After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.
The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.
The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.
The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.CreatBot Brass Nozzle 0,8 mm
Compatible with: CreatBot DX, DX Plus and DE
The series of nozzles from PrimaCreator is the perfect choice for people who only wants the best and at a great value!
Marks/dots on Nozzle = Size
- 0 = 0.20mm
- 3 = 0.40mm
- 4 = 0.60mm
- 5 = 0.80mm
![]() |
---|

P120 - Sensor Sicherungshalterung
P120 - Sensor-Sicherungshalterung
Dies ist eine Sicherungshalterung für den Sensor für deinen P120 3D-Drucker.
Produkteigenschaften:
- Metallplatte und Schraube, die den Sensor in der Platte am Aluminiumblock des V1-Extruders hält
![]() |
---|

P120 - Kabel und Sensor-Set
P120 - Kabel und Sensor-Set
Kaufe dieses Kabel und Sensor-Set für deinen P120 3D-Drucker.
Produkteigenschaften:
- Stromkabel, Sensorkabel und Sensor, der auf die Heizplatte auf P120 passt (V1, V2 und V3)
![]() |
---|

P120 - Heiz-Block V1
P120 - Heiz-Block V1
Dies ist ein Heiz-Block V1 für deinen P120. Heizblock passend für PrimaCreator P120.
Produkteigenschaften:
-
Heiz-Block V1 für deinen P120
![]() |
---|

P120 - Heizelement SC
P120 - Heizelement SC
Kaufe dir dieses Heizelement SC für deinen P120 3D-Drucker.
Produkteigenschaften:
- Heizelement zum Schmelzen von Filamenten
- Passend für PrimaCreator P120
- 12V 40W
- Dies ist mit kurzem Kabel für P120 V3 (blaue Version) mit Schnellanschluss
![]() |
---|

P120 Extruder fan 30-30-10 (Short cable)
Fan that cools the extruder on PrimaCreator P120. 30*30*10, 12 Volt. With short cable that fits to P120 V3 (Blue version)
![]() |
---|

PrimaSelect PVA HT (High Temp) - 2-85 mm - 500 g - natural
PrimaSELECT™ PVA HT (Polyvinylalkohol) ist ein wasserlösliches Material. Am häufigsten wird es als Support-Material verwendet. Fertige mit diesem Filament hochkomplexe Bauteile additiv.
PVA HT verarbeitet ist durchscheinend mit einer leicht gelben Tönung. Dieses Filament wird am häufigsten auf 3D-Druckern mit Dual-Extruder verwendet. Ein Extruder 3D-druckt ein Primärmaterial (wie ABS oder PLA). Als zweites Filament wird dieses leicht lösliche Material eingesetzt, um eine Support-Struktur für überhängende Merkmale bereitzustellen.
PrimaSELECT PVA HT hat eine höhere Verarbeitungstemperatur als unser PVA +. Dies macht es geeignet für Materialien wie ABS, ASA, TPUs und andere Hochtemperatur-Druckermaterialien.
Es funktioniert auch in deinem 3D-Drucker mit beheiztem Bauraum.
PrimaSELECT PVA HT ist das perfekte Trägermaterial für ABS und PETG, da es in Wasser löslich ist. Mit diesem Material kannst du sehr komplexe Objekte erstellen, zum Beispiel wenn du ein hohles Objekt 3D-drucken möchtest. Produziere einfach mit zwei Extrudern das Objekt. Dann das fertige Objekt einfach in Wasser tauchen und beobachten, wie sich das Trägermaterial auflöst.
Für beste Ergebnisse lauwarmes Wasser zum Auflösen verwenden. Optimal ist zirkulierendes Wasser für eine schnellere Auflösung.
Beim 3D-Druck mit PrimaSELECT PVA HT empfehlen wir die Verwendung eines beheizten Betts. Stelle dein Heizbett – für optimale Ergebnisse auf ± 80-90 ° C – ein.
PrimaSELECT PVA HT haftet auf BuildTak oder Glasplatten, die mit Klebstoffspray oder Klebestift beschichtet sind.
PrimaSELECT PVA HT kommt auf einer transparenten Spule mit 500 g hochwertigem Filament aufgewickelt. Es ist in einer stabilen Box verpackt und Luftentfeuchter versehen, um Feuchtigkeit zu vermeiden.
PrimaSELECT PVA HT ist in den Durchmessern 1,75 mm und 2,85 mm erhältlich.
Unsere hochmoderne Fabrik ist mit der neuesten Lasermesstechnik ausgestattet. Dies stellt sicher, dass du eine Spule mit sehr geringer Durchmesserabweichung und Toleranz erhältst. Das sorgt für ein Filament, das mit den meisten marktüblichen 3D-Druckern kompatibel ist.
![]() |
---|

PrimaSelect PVA HT (High Temp) - 1-75 mm - 500 g - natural
PrimaSELECT™ PVA HT (Polyvinylalkohol) ist ein wasserlösliches Material. Am häufigsten wird es als Support-Material verwendet. Fertige mit diesem Filament hochkomplexe Bauteile additiv.
PVA HT verarbeitet ist durchscheinend mit einer leicht gelben Tönung. Dieses Filament wird am häufigsten auf 3D-Druckern mit Dual-Extruder verwendet. Ein Extruder 3D-druckt ein Primärmaterial (wie ABS oder PLA). Als zweites Filament wird dieses leicht lösliche Material eingesetzt, um eine Support-Struktur für überhängende Merkmale bereitzustellen.
PrimaSELECT PVA HT hat eine höhere Verarbeitungstemperatur als unser PVA +. Dies macht es geeignet für Materialien wie ABS, ASA, TPUs und andere Hochtemperatur-Druckermaterialien.
Es funktioniert auch in deinem 3D-Drucker mit beheiztem Bauraum.
PrimaSELECT PVA HT ist das perfekte Trägermaterial für ABS und PETG, da es in Wasser löslich ist. Mit diesem Material kannst du sehr komplexe Objekte erstellen, zum Beispiel wenn du ein hohles Objekt 3D-drucken möchtest. Produziere einfach mit zwei Extrudern das Objekt. Dann das fertige Objekt einfach in Wasser tauchen und beobachten, wie sich das Trägermaterial auflöst.
Für beste Ergebnisse lauwarmes Wasser zum Auflösen verwenden. Optimal ist zirkulierendes Wasser für eine schnellere Auflösung.
Beim 3D-Druck mit PrimaSELECT PVA HT empfehlen wir die Verwendung eines beheizten Betts. Stelle dein Heizbett – für optimale Ergebnisse auf ± 80-90 ° C – ein.
PrimaSELECT PVA HT haftet auf BuildTak oder Glasplatten, die mit Klebstoffspray oder Klebestift beschichtet sind.
PrimaSELECT PVA HT kommt auf einer transparenten Spule mit 500 g hochwertigem Filament aufgewickelt. Es ist in einer stabilen Box verpackt und Luftentfeuchter versehen, um Feuchtigkeit zu vermeiden.
PrimaSELECT PVA HT ist in den Durchmessern 1,75 mm und 2,85 mm erhältlich.
Unsere hochmoderne Fabrik ist mit der neuesten Lasermesstechnik ausgestattet. Dies stellt sicher, dass du eine Spule mit sehr geringer Durchmesserabweichung und Toleranz erhältst. Das sorgt für ein Filament, das mit den meisten marktüblichen 3D-Druckern kompatibel ist.
![]() |
---|

P120 isolierte Abdeckung für Heat-Block
P120 - Isolierte Abdeckung für Heat-Block
Kaufe dir die isolierte Abdeckung für den Heat-Block deines P120.
![]() |
---|

P120 - Hitzesensor-Kabel für Extruder SC
P120 - Hitzesensor-Kabel für Extruder SC
Dies ist ein Hitzesensor-Kabel für deinen Extruder SC deines P120 3D-Druckers.
Produkteigenschaften:
- Sensor mit Kabel zur Messung der Extrudertemperatur am PrimaCreator P120 V3. (Blaue Version)
- Kurzes Kabel
![]() |
---|

P120 Mainboard V3
Mainboard that fits to PrimaCreator P120 v3. (Blue version)
*Does not fit on V1 (White version)
There have been a changed on the latest models so before buying this board, check and compare with the board in your printer.
![]() |
---|

CreatBot gehärtet Nozzle 0-8 mm - 1 Stk
CreatBot Hardened Nozzle 0,8 mm
Compatible with: CreatBot DX, CreatBot DE
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.
All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.
For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.
The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.
After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.
The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.
The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.
The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.
The series of nozzles from PrimaCreator is the perfect choice for people who only wants the best and at a great value!
Marks/dots on Nozzle = Size
- 0 = 0.20mm
- 3 = 0.40mm
- 4 = 0.60mm
- 5 = 0.80mm
![]() |
---|

CreatBot gehärtet Nozzle 0-6 mm - 1 Stk
CreatBot Hardened Nozzle 0,6 mm
Compatible with: CreatBot DX, DE
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.
All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.
For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.
The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.
After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.
The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.
The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.
The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.
The series of nozzles from PrimaCreator is the perfect choice for people who only wants the best and at a great value!
Marks/dots on Nozzle = Size
- 0 = 0.20mm
- 3 = 0.40mm
- 4 = 0.60mm
- 5 = 0.80mm
![]() |
---|

CreatBot gehärtete Nozzle 0-4 mm - 1 Stk
CreatBot Hardened Nozzle 0,4 mm
Compatible with: CreatBot DX, DX Plus and DE
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.
All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.
For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.
The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.
After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.
The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.
The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.
The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.
The series of nozzles from PrimaCreator is the perfect choice for people who only wants the best and at a great value!
Marks/dots on Nozzle = Size
- 0 = 0.20mm
- 3 = 0.40mm
- 4 = 0.60mm
- 5 = 0.80mm
![]() |
---|

CreatBot gehärtete Nozzle 0-2 mm - 1 Stk
CreatBot Hardened Nozzle 0,2 mm
Compatible with: CreatBot DX, DX Plus and DE
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.
All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.
For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.
The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.
After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.
The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.
The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.
The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.
The series of nozzles from PrimaCreator is the perfect choice for people who only wants the best and at a great value!
Marks/dots on Nozzle = Size
- 0 = 0.20mm
- 3 = 0.40mm
- 4 = 0.60mm
- 5 = 0.80mm
![]() |
---|

CreatBot Messing Nozzle 0-8 mm-1 Stk
CreatBot Brass Nozzle 0,6 mm
Compatible with: CreatBot DX, DX Plus and DE
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.
All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.
For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.
The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.
After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.
The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.
The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.
The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.CreatBot Brass Nozzle 0,8 mm
Compatible with: CreatBot DX, DX Plus and DE
The series of nozzles from PrimaCreator is the perfect choice for people who only wants the best and at a great value!
Marks/dots on Nozzle = Size
- 0 = 0.20mm
- 3 = 0.40mm
- 4 = 0.60mm
- 5 = 0.80mm
![]() |
---|

CreatBot Messing Nozzle 0-6 mm-1 Stk
CreatBot Brass Nozzle 0,6 mm
Compatible with: CreatBot DX, DX Plus and DE
The premium nozzles from PrimaCreator are a series of replacement nozzles that can make more difference for the result than you may think. To have a high-quality nozzle is like having a sharp pencil, you need it to get a great print.
All nozzles from PrimaCreator are made from the best high-quality brass or steel (depending on type) and are completed in a state of the art factory. All nozzles are manufactured with a tolerance of less than ± 0.01 mm. This means that your filament will have a very smooth and clear surface while extruding which, of course, results in better prints.
For best results and optimal print quality, we highly recommend that you re-level your build plate after changing to a new nozzle. Note that a PrimaCreator nozzle might be compatible with your printer, but the distance between nozzle and build plate must be adjusted.
The process of making a PrimaCreator nozzle begins with a selected high-quality material. When the material reaches the factory, there is first an optical inspection made of the material that are going to be used for each batch of nozzles. Then it´s time to clamp the material, in other words, make it into a long rod. In our process this only is done once, in many other (cheaper) cases, this process must be repeated several times, often as many as 3-4 times and yet you don´t get the same results.
After this process, the material goes through an ultrasonic cleaning bath and after that it is cleaned again and protected against surface oxidation.
The nozzle will now take shape with millimeter precision, the tolerance is less than ± 0.01 mm.
The process of removing sharp edges from the nozzles is a very important step as this makes up a big part of the result. If there is to much sharp edges left on the nozzle it will make the nozzle more prone to clog. So it´s essential that the nozzle is very smooth and clean before it is used. In every batch a few nozzles are selected and cut in half to make sure that every specification is met, and that the surface is in perfect condition.
The nozzles are then checked for one last time and packed individually in a protective box – ready to be shipped to you.
The series of nozzles from PrimaCreator is the perfect choice for people who only wants the best and at a great value!
Marks/dots on Nozzle = Size
- 0 = 0.20mm
- 3 = 0.40mm
- 4 = 0.60mm
- 5 = 0.80mm
![]() |
---|
Artikel 201 - 250 von 395 gesamt.