Filament & Resin > Hersteller > BCN3D, Filament & Resin > Hersteller > BCN3D: BCN3D Filaments PET-G - 2-85 mm - 750 g - Black

BCN3D Filaments PET-G - 2-85 mm - 750 g - Black


PET-G (Polyethylene terephthalate glycol-modified) is a polyester thermoplastic characterised by a good balance of tensile strength and elongation at break. Its high resistance to water and chemicals makes it the material of choice for water-tight containers and protective cases.

PET-G is a versatile technical material, as easy to print as PLA, but with an improved balance of mechanical, chemical and thermal properties.

Compatibility: Find out the BCN3D printers and filaments compatibility


  • Parts in contact with salts, acids and alkalis
  • Functional prototypes and mechanical parts
  • Waterproof applications
  • Structural parts subject to mild stress
  • Snap-fit joints
  • Commonly used in beverage bottles


  • Resistance to corrosive chemicals
  • Good balance of strength, impact resistance and elongation at break
  • Great dimensional stability and toughness
  • Good glossy surface quality
  • Good abrasion resistance
  • Water and moisture barrier
  • Withstand operating temperatures up to 70°C
  • Low rate of ultrafine particles (UFP) and volatile organic compounds (VOC)
  • Compatible with PVA supports

Technical information

Good balance of strength and ductility

PET-G parts are as strong as those made with PLA but offer a better mechanical profile. PET-G is not brittle, which means that it will not snap abruptly if pulled or bended, on the contrary, it will progressively bend and stretch until reaching it maximum elongation limit of 23%.


Resistant to chemicals and humidity

PET-G is highly resistant to chemicals and humidity, which allows for disinfection and cleaning without losing its mechanical properties to hydroalcoholic solutions.src=

Fast Tooling

Use it to fast-track the manufacture of jigs and fixtures for your production chain.


Mechanical parts

PET-G is ideal for end-use parts demanding mechanical and thermal properties.


- BCN3D Filaments PET-G - 2-85 mm - 750 g - Black ist ein Artikel aus der Filament & Resin > Hersteller > BCN3D Kategorie.

BCN3D Filaments PET-G - 2-85 mm - 750 g - Black

Andere Artikel vom Hersteller BCN3D:

BCN3D Epsilon W27 - Sigma D25 Left X-axis Cable (FFC X0)

BCN3D Endstop X

BCN3D Filaments ABS - 2-85 mm - 2-5 kg - Black

BCN3D Nylon Cleaning Method Kit

BCN3D Glass Printing Surface

Sigmax R19 Abdeckungs-Gehäuse

BCN3D Set of Shims

BCN3D Lubrication Kit

BCN3D Filaments PET-G - 2-85 mm - 750 g - Black

BCN3D Extruder Board

BCN3D Filaments TPU - 2-85 mm - 750 g - Black

BCN3D Filaments PET-G - 2-85 mm - 2-3 kg - White

3D Prima

Copyright © 2018 - gelistet bei google, bingT and yahoo!®